Vertiv RPC2 - User Level Privileges and Access; Using Passwords for Security

backup
source
<type>
ftp
<ipaddr>
<username>
<passwd>
<filedir>
<filename>
Examples
To restore all configurations, enter the following command.
cli->backup_restore restore
To back up all configurations, enter the following command.
cli->backup_restore backup
To configure the file name to be used for the backup and restore file, enter the following command.
cli-> backup_restore ftp filename <file name>
2.5 breakerstate
Type breakerstate to display the status (Open or Close)of the branch overcurrent protection in a rack PDUor Rack
PDUArray™. This command is available for an admin, appliance or poweruser.
breakerstate
help
<pdu>
<pdu.branch>
Table 2.4 Syntax
Examples
To view the status of PDU2, enter the following command.
cli->breakerstate 2
[2] --- (A) Close (B) Close (C) Close
To view the status of branch Bon PDU2, enter the following command.
Vertiv | RPC2™ Communications Module Command Reference Guide | 7