Vertiv RPC2 - Label; Meminfo; Message

2.17 label
Type label to display the configurable values of the user-defined label for a PDU, branch or receptacle. This command is
available for an admin, appliance or poweruser.
label
help
pdu
<pdu>
<pdu.branch>
<pdu.branch.receptacle>
<label_value>
Table 2.14 Syntax
Examples
To display the values for a receptacle, enter the following command.
cli->label <pdu.branch.receptacle>
To configure a value for a receptacle, enter the following command.
cli->label <pdu.branch.receptacle><new label>
2.18 meminfo
Type meminfo to display the RAMavailability and current usage for an admin.
Example
cli->meminfo
Total memory size : 256380 kB
Used memory size : 80068 kB
2.19 message
Type message to display and permit the configuration of messaging settings by an admin.
message
help
Table 2.15 Syntax
Vertiv | RPC2™ Communications Module Command Reference Guide | 20