Vertiv RPC2 - Firmware Update Procedure

Examples
To enable email messaging, enter the following command.
cli-> message email enable
To configure the time limit for SMS, enter the following command.
cli-> message consolidation time_limit sms <value>
2.20 nandinfo
Type nandinfo to display the nandflash availability and usage for an admin.
Example
cli->nandinfo
Total nandflash size : 65536 kB
Used nandflash size : 37732 kB
2.21 network
Type network to display the configurable network parameters of a rack PDU or Rack PDU Array™ for an admin.
network
help
dns
ipv4
mode
<value>
primary
<ip address>
secondary
<ip address>
resolve
<value>
ipv6
mode
Table 2.16 Syntax
Vertiv | RPC2™ Communications Module Command Reference Guide | 22