Vertiv RPC2 - Connecting RPC BDM to Module

model
<pdu>, <pdu.branch>
plug
<pdu>
rating
<parameter> (voltage, current, frequency)
<pdu>
<parameter> <PDU>
receptacle
<pdu>, <pdu.branch>, <pdu.branch.receptacle>
serialnumber
<PDU>, <BRN>
pdu
<pdu>
webcard
<pdu>
source
<pdu>, <pdu.branch>
version
<PDU>, <BRN>
pdu
<pdu>
webcard
<pdu>
wiring_type
<pdu>
Examples
To view the serial number for a PDU, enter the following command.
cli->sysinfo serialnumber <pdu>
To view voltage information for PDU2, enter the following command.
cli->sysinfo rating pdu voltage 2
[2] --- 120 V
2.35 syslog
Type syslog to permit an admin to view and configure the syslog parameters for a rack PDUor Rack PDUArray ™.
Vertiv | RPC2™ Communications Module Command Reference Guide | 38