Vertiv RPC2 - Energy

devicechange
help
acknowledge
show
Table 2.10 Syntax
Example
To display a device change, enter the following command.
cli-> devicechange show
Module Serial Number Module Type Change
---------------------------------- ------------------------------ --------
4037-122 Rack PDU Card Added
DY2013OCT142575-B1 Branch Receptacle Module Added
DY2013OCT142575-B2 Branch Receptacle Module Added
DY2013OCT142575-B3 Branch Receptacle Module Added
2.12 energy
Type energy to display the values of the accumulated real power energy (kWatt-hr) reading from the energy counter and
facilitate resetting the energy counter to zero. This command is available for an admin, appliance or poweruser.
energy
help
pdu
<pdu>
<pdu.branch>
<pdu.branch.receptacle>
reset
<pdu>
Table 2.11 Syntax
Vertiv | RPC2™ Communications Module Command Reference Guide | 15