Vertiv RPC2 - Group

cli->fwupdate ftp ipaddr <ip address>
cli->fwupdate ftp username <user name>
cli->fwupdate ftp passwd <password>
cli->fwupdate ftp filedir <file directory>
cli->fwupdate ftp filename <file name>
2.16 group
NOTE: A user can only be allocated to one group and must be created before being added to a group. You must delete
a user from a group before adding it to a new group. By default all receptacles are in the admin group.
Type group to permit an admin to perform the following tasks:
• Create custom groups
• Delete custom groups
• Add or remove a local or remote user to default or custom groups
• Add or remove receptacles to custom groups
• Display all groups as well as all users and receptacles allocated to each group
group
help
add
del
receptacle
add
<group_name>
del
<group_name>
show
group element
<group_name>
user
add
<group_name>
local
Table 2.13 Syntax
Vertiv | RPC2™ Communications Module Command Reference Guide | 18