Vertiv RPC2 - BDM Data Availability Levels

2.40 user
Type user to permit an admin to add or delete a local user. An admin can also view the groups to which a user has been
assigned.
user
help
add
<user>
<password>
<confirm password>
del
<user>
<user_name>
Table 2.36 Syntax
Examples
To add a user, enter the following command.
cli->user add <username><password><confirm password>
2.41 voltage
Type voltage to display the metered reading of the ACvoltage (RMS)for an input, branch or receptacle in a rack PDUor
Rack PDUArray™. This command is available for an admin, appliance or poweruser.
voltage
help
<pdu>
<phase>
<phase pair>
<pdu.branch>
<phase>
<phase pair>
<pdu.branch.receptacle>
Table 2.37 Syntax
Examples
To view the voltage for PDU2, phase 1, enter the following command.
cli->voltage 2 L1
Vertiv | RPC2™ Communications Module Command Reference Guide | 43