Vertiv RPC2 - RPC BDM Active Alarms; RPC BDM Sensor Information

[2-C] --- (6-T2) PDU#2_BRN#C_RECP#6_TAG#02
To configure tag 1 of PDU2 in an array, enter the following command.
cli->tag 2 1 PDU#2_NEW_TAG#1
2.38 time
Type time to permit an admin to view and configure the time server.
time
help
source
<source_type> (local, ntp_server)
ntp server
<ip_address>
ntp rate
<time_interval>
local
<yyyy-mm-dd>
<hh:mm:ss>
format
<clock type>(12- or 24-hour)
zone
<0-92>(use help to get zone list)
Table 2.34 Syntax
Examples
To view the current time settings, enter the following command.
cli->time
Source----------------Local
Zone-----------------(GMT+08:00) Beijing, Chongqing, Hong Kong, Urumqi
Clock format---------12 - Hour
Vertiv | RPC2™ Communications Module Command Reference Guide | 41