Vertiv RPC2 - Authentication Methods

Label………………RecGroup 2
Receptacles…….1-A-2, 1-B-2,1-C-2,1-D-2,1-E-2,1-F-2,1-A-5
Powerstate……..Off
Lockstate………..Unlocked
[3]
Id……………………3
Label………………RecGroup 3
Receptacles…….1-A-6, 1-B-5,1-C-4,1-D-3,1-E-2,1-F-1
Powerstate……..Off
Lockstate………..Unlocked
To lock a receptacle group, enter the following command.
cli->receptaclegroup <group>unlock
2.28 receptaclestate
Type receptaclestate to enable all users to view and configure the state of receptacles, including the power, operate, lock
and critical states.
receptaclestate
help
<pdu>, <pdu.branch>, <pdu.branch.receptacle>
Table 2.24 Syntax
Vertiv | RPC2™ Communications Module Command Reference Guide | 30