Vertiv RPC2 - SNMPv3 Traps Configuration; Web Server Configuration; Certificate Management

receptaclegroup
help
delete
<group>
label
<group>
<user_defined receptacle label>
<group>
on, off, lock, unlock, cycle, blinkled
<group>
<comma separated receptacle names>
Table 2.23 Syntax
Examples
To view a receptacle group, enter the following command.
cli->receptaclegroup
[1]
Id……………………1
Label………………RecGroup 1
Receptacles…….1-A-1, 1-B-1,1-C-1,1-D-1,1-E-1,1-F-1
Powerstate……..Off
Lockstate………..Unlocked
[2]
Id……………………2
Vertiv | RPC2™ Communications Module Command Reference Guide | 29