Vertiv RPC2 - SNTP Time Settings; Notification Configuration; Messaging Configuration

netmask
<netmask>
speed
<value>
Examples
To display the DNSIPv4 settings, enter the following command.
cli-> network dns ipv4
IPv4 DNS Server Address source------ Automatic
IPv4 Primary DNS Server---------------- 172.26.29.4
IPv4 Secondary DNS Server------------ 172.26.29.5
IPV4 DNS Resolve Interval………………. 1 hour
To configure the secondary address for DNSIPv6, enter the following command.
cli-> network dns ipv6 secondary <address>
2.22 notification
Type notification to permit an admin to view and enable or disable event notifications for Email, SMS, SNMP tramp or
syslog. The following figure shows the available notifications types.
Vertiv | RPC2™ Communications Module Command Reference Guide | 24