Vertiv RPC2 - Backup and Restore Configuration; USB Memory Stick Configuration

cli->notification all syslog enable
To enable SMSnotification for a specific event, enter the following command.
cli->notification <code>sms enable
2.23 password
Type password to enable an admin to set and modify the password for all local users. Local users can set and modify their
own password.
password
help
reset
<user_name><password>
<confirm_password>
<user name>
<old password>
<new password>
<confirm password>
Table 2.18 Syntax
Example
To change your password, enter the following command.
cli->password <your name><old password><new password><confirm password>
NOTE: Anew password can not be the same as the old password.
2.24 power
Type power to display the real (watts)and apparent (VA)power for an input phase, branch or receptacle in a rack PDU or
Rack PDU Array™. This command is available for an admin, appliance or poweruser.
power
help
<pdu>
<phase>
<phasepair>
<pdu.branch>
<pdu.branch.receptacle>
Table 2.19 Syntax
Vertiv | RPC2™ Communications Module Command Reference Guide | 26