current {cmd_option} {PDU} {PHASE}
current threshold {PDU}.{BRN}[.{RECP}] {threshold_values}
current threshold {PDU} {PHASE} {threshold_values}
...{cmd_option= threshold, untilalarm, utilization}
...{PDU= 1..4} {PHASE= L1, L2, L3, N, @} {BRN= A..G, @} {RECP= 1..48, @}
...For L1, L2, L3 : {threshold_values = (high_critical=0..100):(high_warn=0..100):(low_critical=0..100)}
...For N : {threshold_values = (high_critical=0..100):(high_warn=0..100)}
Vertiv | RPC2™ Communications Module Command Reference Guide | 5
To Next Page
Loading...
