Videonics MXPro - OTHER USEFUL INFORMATION; ABORTING A PLAYBACK SESSION

112
Chapter 11 Videonics MX-Pro User Guide
O
THER
U
SEFUL INFORMATION
When MXPro comes to the end of a Learned Script, it stops. You can re-initiate the
same or any other Learned Script by entering the SHIFT+LEARN+<learned script #>
for the script you want to run.
You can do the following in a Learned Script:
¨ Perform transitions, including use of Reverse and Speed settings.
¨ Choose CURRENT and NEXT sources.
¨ Use the Freeze function.
¨ Transition audio, video, or both.
You cannot do the following in a Learned Script:
¨ Create or transition to Compose screens.
¨ Use Chroma Key.
¨ Use the Demo.
¨ Use PIPs.
MXPro memorizes a manual transition (such as when using the T-BAR) as an auto-
matic transition at the currently set speed — that is, it is remembered as if you had
used the PLAY button rather than the T-BAR.
MXPro erases a Learned Script when:
¨ You turn off MXPro.
¨ MXPro loses power (such as a power failure).
¨ You overwrite an existing Learned Script.
ABORTING A PLAYBACK SESSION
Once MXPro begins playing back a Learned Script, you can abort the playback session,
by pressing LEARN.
Once you end playback of a Learned Script, the PLAY button and the T-BAR act nor-
mally, playing the effect indicated on the screen rather than the Learned Script.