Videonics MXPro - SELECTING TRANSITIONS

56
Chapter 5 Videonics MX-Pro User Guide
SELECTING TRANSITIONS
To select a transition to use between the CURRENT and NEXT sources, do one of the
following:
• Use the ARROW keys to select from the Transitions Menu on the Preview screen;
or,
• Enter the transition’s assigned number on the MXPro numeric keypad, then press
OK.
Note
When selecting from the USER category, you must always use the ARROW keys to select a
transition from the Transition Menu on the Preview screen. Entering a transition number
and pressing OK replaces the current transition with the one you select.
Using the Transitions Menu
The Transitions Menu appears just below the preview images on the Preview screen
when you set the Preview to STANDARD or TWO CHANNEL mode (see “Display”
beginning on page 73 for more information about Preview modes).
1
4
7
2
5
8
0
3
6
9
OK
Preview
Screen
Numeric
Keypad
Use ARROW keys to select
a transition from the
Transition Menu on the
Preview Screen…
or
…enter the transition
number on the keypad…
then press OK.
…
Blue highlights the selected transition
Each icon in the
menu represents
one transition.