129
Advanced Operations Resetting MXPro Factory Defaults
RESETTING MXPRO FACTORY DEFAULTS
When you first power up MXPro, it operates using settings defined by Videonics. As you
go about using MXPro and changing its various settings, the unit stores your settings
in its memory (called NVRAM). You can reset all settings to their factory defaults.
To reset MXPro to its factory defaults:
1 Power down the unit (using the Power switch).
2 Press down and hold the SHIFT and SETUP buttons.
3 Turn on MXPro’s Power switch.
4 After the unit powers up and you see the Preview screen, release all buttons.
To Next Page
Loading...
