85
Functions Freeze Examples
Creating Still Montages You can use the Freeze function to transition between a series of still images to create a
“still montage.” You can use anywhere from one to four sources.
To create a still montage:
1 Route at least one video source to Channel A. Remember, you can use up to as
many as four sources for this procedure.
This example starts from a black screen, then transitions to a still image.
2 Enter BG COLOR+0 (zero) to set the background color to black.
3 Press CUT/COLOR to set the Color Channel as the Current source. You now have
a black screen on the Program monitor.
4 Press NEXT/A to set Channel A as the Next source.
5 Enter SHIFT+4 to set the Preview monitor to Preview Next mode.
You’re now ready to create and transition to the first still image.
6 Enter SHIFT+FREEZE to create a frozen image on the Next channel.
7 Enter 1+PLAY to dissolve from black to the first frozen image.
The Next and Current sources swap positions. You’re now ready to select the sec-
ond still image.
8 Press any NEXT button to release the freeze on the Next source and select a new
source to freeze.
9 Enter SHIFT+FREEZE to freeze the Next image.
10 Enter 1+PLAY to dissolve to the Next image.
To transition to other still images, repeat steps 8 through 10.
To Next Page
Loading...
