15
TAB: 40507
EN
If the entry panel is equipped with a camera, both the video and the audio channels will be activated on the
monitor. If not, only the audio channel will be activated.
On the Master panel, assign the ID to the monitor by pressing the button to be associated or, in the case of
alphanumeric panel, enter the address (ID) you wish to use and then press the conrm button to complete the
conguration.
N.B.: You have 20 seconds to complete this operation.
If a problem occurs during conguration and the procedure is interrupted, the installer will be notied by a
message similar to that in the gure below.