42
TAB: 40507
EN
Calls to entry panels
Gives access to a screen page containing all the ENTRY PANELS in the system and activated from
the SaveProg setup program.
Customizing the registry
The name of each entry panel can be customized by accessing the call options page from
SettingsCallCustomization
Making a call
To make the connection to an entry panel, proceed as follows:
- Select the desired entry panel (it will be highlighted by the green bar).
- Press the start video button:
- On connection to the entry panel, the video entryphone switches to full screen display mode.
This operation can be completed successfully only if there are no other video entryphone calls in progress. In
fact, a call from an entry panel will have top priority and therefore if an intercom call is in progress, the video
entryphone will interrupt the connection and prepare to answer the call.
To Next Page
Loading...
