Vimar ELVOX TAB 40507 User Manual

46
TAB: 40507
EN
CCTV
Gives access to a page listing all the CCTV cameras in the system and activated from the SaveProg
setup program.
Customizing the registry
The name of each entry panel can be customized by accessing the call options page from
SettingsCallCustomization
Starting video connection
To make a connection to a CCTV camera proceed as follows:
- Select the desired camera (it will be highlighted by the green bar).
- Press the start video button:
- On connection to the entry panel, the video entryphone switches to full screen display mode.
The operation can only be completed successfully if there are no other video entryphone calls in progress, as these
always have priority over intercom calls, camera startup, calls to entry panels, etc.. A call from an entry panel will
have top priority and therefore the video entryphone will interrupt the connection and prepare to answer the call.

Vimar ELVOX TAB 40507 Specifications

General

Brand	Vimar
Model	ELVOX TAB 40507
Category	Intercom System
Language	English