104
TAB: 40507
EN
Updating the rmware
Updating the rmware enables you to obtain all the benets of improvements introduced in production.
Updating the rmware from a computer (via USB)
To update the device manually, the monitor must be connected to a computer using the specic cable.
Press Start, then enter the password (this operation is subject to access control because it is highly sensitive)
and wait until the device connects to the computer.
This could take a few seconds.
As soon as the connection is established, a new external resource will appear on the computer (update), and
the device will display the following information
To Next Page
Loading...
Need help?
General
