32
TAB: 40507
EN
While the Do Not Disturb function is activated, it is not possible for the user to activate the Do Not Ring function.
To deactivate this function, simply press the Do Not Disturb command again. The button will return to its original
form and the icon will disappear from the top bar.
Do Not Ring function
Activating this function puts the device in Do Not Ring mode for all calls originating from entry panels or internal
units.
To activate this function, simply press the relative button.
When the function is activated, the button will be highlighted and the icon
, will appear in the top bar as
shown in the image below.
To Next Page
Loading...
