Vimar ELVOX TAB 40507 - Operating Mode; Commands

90
TAB: 40507
EN
Operating mode
Allows you to select the network operating mode.
Allows you to choose the network connection method.
- ON: connection to an existing Wi-Fi network. In this case you will need the data set on the router during
installation.
- HOTSPOT: allows you to use the built-in router to create an Access Point network.
- OFF: puts the device ofine.
Commands
saves the conguration and, in the cases of the ON and HOTSPOT operating modes, takes you to the
second conguration stage;
quits without saving the changes made and returns you to the Settings page.