70
TAB: 40507
EN
Screen brightness and timeout
The “Screen brightness and timeout” function allows you to set the screen brightness level and the the timeout
(expressed in seconds) after which the touch screen display goes to sleep.
Changing the brightness of the screen
The brightness is adjusted using the horizontal slide control . To reduce the brightness, drag the slider to the left;
to increase it, drag the slider to the right. The brightness percentage value is shown on the right of the slide control.
Setting the timeout
The timeout is adjusted using the horizontal slider control .
The adjustment range is from 10 to 60 seconds. To reduce the screen timeout, drag the slider to the left; to
increase it, drag the slider to the right. The number of seconds is shown on the right of the slide control.
Commands
to save the selection and return to the previous screen;
to quit without saving and return to the previous screen.
To Next Page
Loading...
Need help?
General
