For the configuration of the PROFIBUS DP master please follow the
following approach:
n Hardware configuration - CPU
n Deployment as DP master or Deployment as DP slave
n Transfer of the complete project to CPU
Ä
Chapter 5.10
‘Project transfer’ on page 60
In the Siemens SIMATIC Manager the CPU 313-6CF13
from VIPA is to be configured as
CPU 313C-2DP (6ES7 313-6CF03-0AB0 V2.6)
The integrated PROFIBUS DP master (socket X3) is to be
configured and connected via the sub module X2 (DP).
The Ethernet PG/OP channel of the 313-6CF13 is always
to be configured as 1. module after the really plugged
modules at the standard bus as CP343-1 (343-1EX11)
from Siemens.
8.3 Hardware configuration - CPU
The configuration of the CPU takes place at the Siemens ‘hardware
configurator’ . The hardware configurator is part of the Siemens
SIMATIC Manager. It serves for project engineering. The modules,
which may be configured here are listed in the hardware catalog. If
necessary you have to update the hardware catalog with ‘Options
è Update Catalog
’.
For project engineering a thorough knowledge of the Siemens
SIMATIC Manager and the Siemens hardware configurator is
required.
Please consider that this SPEED7-CPU has 4 ACCUs.
After an arithmetic operation (+I, -I, *I, /I, +D, -D, *D, /D,
MOD, +R, -R, *R, /R) the content of ACCU 3 and ACCU 4
is loaded into ACCU 3 and 2. This may cause conflicts in
applications that presume an unmodified ACCU 2.
For more information may be found in the manual "VIPA
Operation list SPEED7" at "Differences between SPEED7
and 300V programming".
To be compatible with the Siemens SIMATIC Manager the following
steps should be executed:
1. Start the Siemens hardware configurator with a new project.
2. Insert a profile rail from the hardware catalog.
3. Place at ‘Slot’ number 2 the Siemens CPU 313C-2DP (6ES7
313-6CF03-0AB0 V2.6).
4. The integrated PROFIBUS DP master (socket X3) is to be con-
figured and connected via the sub module X2 (DP).
Steps of configuration
Precondition
Proceeding
VIPA System 300S Deployment PROFIBUS communication
Hardware configuration - CPU
HB140 | CPU-SC | 313-6CF13 | GB | 15-50 177
To Next Page
Loading...