Item 2 WAN Creation / Deletion
2.A
Building WAN Services
WAN Services Must be added as follows
1: Add & Define WAN Interface
ATM
PTM
ETH (Omni-Port)
2: Add and Define Service to Interface
ATM
PTM
ETH (Omni-Port)
3: Prioritize for Default Service Group
Gateway
DNS
4: Add Service Group
If Applicable
2.B Tearing Down WAN Services
WAN Services Must be removed as follows:
1: Remove WAN Service
This must be removed first
2: Remove Interface
This may not be removed unless all
associated WAN Services are removed
3: Remove Service Group
Remaining Group Interfaces will not be
ungrouped by default
VisionNet M504 / M505N R3 Page 12 of 62 User Manual Rev 0.1c
To Next Page
Loading...
