Visonic KP-250 PG2 Installer's Guide

3.4.4 Modifying or Reviewing a Device
To Modify or Review the device parameters, complete the following steps:
Step 1

Step 2

Step 3

Select "MODIFY
DEVICES" Option
[1]
Select the respective
device Group
[2] Select exact device you
wish to modify
[3]
 

02:ZONES/DEVICES CONTACT SENSORS


MODIFY DEVICES MOTION SENSORS Z10:Motion Camra
ID No. 140-1737
Step 4

Step 5
Select the Parameter you
wish to modify
[4]
Modify the Parameter

Z10:LOCATION
See  [4]
When done

to step 2
Z10:ZONE TYPE
Z10:SET CHIME
Z10:PARTITIONS
Z10:DEV SETTINGS

 – Modifying or Reviewing a Device
[1]
Enter the Installer Menu, select the "02:ZONES/DEVICES" option (see section 3.2) and then select the
"MODIFY DEVICES" option.
[2]
Select the respective group of the device you wish to review or modify. For example, "MOTION SENSORS".
[3]
Scroll the Device Group, identify by zone and/or ID number the exact device you wish to modify or review, for
example: "Z10:Motion Camra > ID No. 140-1737".
[4]
From here on the process is same as the configuration process that follows the enrollment of that device. To
continue, refer to Section 3.4.2 Part B. When done, the display will show the next device of the same type
(i.e. "Motion camera").
20 D-306919 KP-250 PG2 Installer’s Guide

Visonic KP-250 PG2 Specifications

General

Brand	Visonic
Model	KP-250 PG2
Category	Keypad
Language	English