Visonic KP-250 PG2 - PGM Connection; Entering Daytime Limits

3.7.5 PGM Connection
05:OUTPUS PGM OUTPUTS P01: PGM on Board PGM on Expander
Program the PGM outputs, select the PIN# and choose the required option.
Step 1
Step 2
Step 3
Select "05:OUTPUTS" menu
Select "PGM Outputs" menu
Select PGM on Expander Press


05:OUTPUTS
PGM Outputs PGM-on Expander
Step 4
Step 5
Step 6
KP-250 PG2 displays currently PIN#
1
Select "silent" or "audible" options
Press to return to “PGM Outputs” or
to take you to “<OK> to Exit"


PGM OPTIONS
Silent
PGM OPTIONS
Audible
PGM-5 OPTIONS
Audible
3.7.6 Entering Daytime Limits
05:OUTPUS
⋅⋅⋅
LOCKOUT TIME
Enter the "LOCKOUT TIME" menu and enter the daytime limits through which the PGM device will turn off, even when
the associated sensors are triggered.
Step 1 Step 2 Step 3
Select "05:OUTPUTS" menu Select "LOCKOUT TIME"
Press


OUTPUTS
LOCKOUT TIME
start time HH:MM
11:00
Step 4
Step 5 Step 6
Enter the time at which you wish the
lockout state to begin
Press
Press
start time HH:MM
11:00
start time HH:MM
09:30
stop time HH:MM
19:00
Step 7
Step 8
Enter the time at which you wish the
lockout state to end.
Press to return to “LOCKOUT
TIME” or
to take you to “<OK> to Exit"
stop time HH:MM
19:00
stop time HH:MM
16:30
58 D-306919 KP-250 PG2 Installer’s Guide