Visonic KP-250 PG2 - Record Speech

3.8.2 Record Speech
6
You can record short-duration speech messages for the house identity, user names and custom zone names.
For the recording procedure follow the instructions below. Additional details and guidance are provided in section 3.2.
06:CUSTOM NAMES
⋅⋅⋅
RECORD HOUSE ID
Enter "RECORD SPEECH", select the menu you wish to perform (see guidance above), and then refer to the tables
below which provide you with detailed explanations for each option.
Option Instructions
RECORD HOUSE ID
You can record a message to be announced automatically when events are reported to
private telephones.
While in "RECORD SPEECH", press ; the display now reads "RECORD HOUSE
ID"

"REC-<2> PLAY-<5>" (this means, press the button to record and the
button to play recording through the PowerMaster-30 G2 control panel or external voice
box).
To initiate the recording procedure, press the button continuously to record your
message; "RECORD A MSG" appears momentarily and then changes to "TALK NOW"

( ) 0%. A progress indicator will be displayed that is incremented each
time by 25%, as follows: 0%, 25%, 50%, 75%, 100%.
At the end of the recording process, the KP-250 PG2 will display the following:
"RECORDING ENDED". Release the button.
Note: To check the recorded message, press the button and listen to the playback
through the PowerMaster-30 G2 control panel or external voice box.
To advance to the next stage in the recording procedure; from the "RECORD HOUSE ID" menu, click ; the display
will change to “RECORD USER NAME”. Press to proceed.
Option Instructions
USER VOICE 23
You can record ten user names and assign them to users 23-32. In case of event, the
relevant user name will be added to the message that will be reported via the telephone.
Record user names for 23-32; the procedure is identical to the "RECORD HOUSE ID"
recording procedure described above. Click to navigate between user name
numbers.
To advance to the next stage in the recording procedure; from the "RECORD USER NAME" menu, click ; the
display will change to “RECORD ZONE NAME”. Press to proceed.
6
Refers to Powermaster-30 G2 with voice option.
62 D-306919 KP-250 PG2 Installer’s Guide