Visonic KP-250 PG2 - Page 29

Step 2
Select the "Control Panel" parameter you wish to configure and go to the indicated group section of the selected
option. When done  to step 2.


 
See section 3.5.2
See section 3.5.3
See section 3.5.4 See section 3.5.5
03:EXIT DELAY 21:SWINGER STOP 31:PANIC ALARM 43:PANEL SIREN
05:QUICK ARM 22:CROSS ZONING 32:DURESS ALARM 44:SIREN TIME
06:BYPASS ARM
Continues
33:INACTIVE ALRT 45:STROBE TIME
07:LATCHKEY ARM 34:TAMPER ALARM 46:SIREN ON LINE
09:ARMING KEY 35:AC FAIL RPRT
Continues
Continues
39:ALARM RESET
40:ABORT FIRE T.
Continues
Arming & Disarming
Zone Behavior
Alarms & Troubles
Sirens
26 D-306919 KP-250 PG2 Installer’s Guide