Visonic KP-250 PG2 - Page 40

Option
Description of Option Features and Parameters
Section
1:PSTN TEL LINE
Contains configurable features and parameters related to the PSTN
telephone line to which the PowerMaster is connected.
3.6.2
2:GSM/GPRS/SMS
Contains configurable features and parameters related to the Cellular
connection of the PowerMaster system.
3.6.3
3:C.S.REPORTING
Contains configurable features and parameters related to Reporting of
event messages to Monitoring Stations via telephone, cellular or IP
broadband communication.
3.6.4
4:PRIVATE REPORT
Contains configurable features and parameters related to Reporting event
messages to Private Users via email, telephone, MMS or SMS.
3.6.5
5:MOTION CAMERA
Contains configurable features and parameters related to Motion Cameras
for Video Alarm Verification and forwarding of image clips to the Monitoring
Station and other remote subscribers via e-mail and/or MMS network.
3.6.6
6:UP/DOWNLOAD
Contains configurable connection information, access permission and
security codes related to the Upload/Download procedures via PSTN or
GPRS.
3.6.7
7:BROADBAND
Contains DHCP Client settings, enables to enter LAN parameters and
reset broadband module/settings.
3.6.8
To enter the "04.COMMUNICATION" menu and to select and configure an option, complete the following steps:
Step 1
Select "COMMUNICATION"

INSTALLER MODE

Step 2
Step 3
Step 4
Select Communication Sub-menu
Select the "Communication" Parameter you wish to configure



See
1:PSTN TEL LINE
AREA CODE SKIP
3.6.2

LINE PREFIX
D-306919 KP-250 PG2 Installer’s Guide 37