EasyManua.ls Logo

Visonic KP-250 PG2 - Page 51

Visonic KP-250 PG2
104 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Option and default Configuration Instructions
ringback time
Send 2wv code
disable
Options: disable and enable.
voice<- ->cs
disable
Options: disable; timeout 10/45/60/90s; timeout 2m; and ringback.
Note: If "ring back" is selected, you should select "disable report" for private telephone (see
Option "01:REPORT EVENTS"), otherwise the Monitoring Station will establish communication
with the control panel (after an event occurrence) in the normal manner (and not after one ring).
Ringback time
1 minute
Options: 1/3/5/10 minute(s).
ambient level
low
Options: low and high.
66:24h ZONE RPRT
both burglary
Define whether 24 hour (silent and audible) zones will function as normal 24 hour zones or as
panic zones.
Applicable in UK only
Options: audible as panic; silent as panic; both as panic; and both burglary.
48 D-306919 KP-250 PG2 Installer’s Guide

Table of Contents

Other manuals for Visonic KP-250 PG2

Related product manuals