Notes:
1) There is a brief pause after which all factory defaults are restored or devices are deleted from the system.
2) To abort the procedure, press to return to “09:FACTORY DEFAULT” or to take you to “<OK> to
Exit".
Notes:
1. For KP-250 PG2 with 2 installer codes, INSTALLER code and MASTER INSTALLER code, only the master installer
code enables to perform the factory default function.
2. If the Soak Test is active, performing factory default will restart the Soak Test.
D-306919 KP-250 PG2 Installer’s Guide 71
To Next Page
Loading...
