Visonic KP-250 PG2 Installer's Guide

Option Instructions
To test motion detector with integrated camera (Next CAM PG2 or TOWER CAM
PG2):
1. Press to enter the "TEST ONE DEVICE" sub menu and use to
navigate to "MOTION SENSORS".
2. Press ; the following screens will appear: "Z01:Motion Sens"

<location>.
3. Press continuously to select a different zone number.
4. Press ; the following screen will appear: "Zxx ACTIVATE NOW".
5. Activate the input of the detector; the following screens will appear: "<Zxx IS
ACTIVATE>"

"<OK> SEND IMAGE".
86 D-306919 KP-250 PG2 Installer’s Guide

Visonic KP-250 PG2 Specifications

General

Brand	Visonic
Model	KP-250 PG2
Category	Keypad
Language	English