Common area zone types Definition
Gas; Temperature; 24-hour
silent; 24-hour audible
Non alarm • Always ignored. There are no alarms for non-alarm zone types. Can be used for
example to activate PGMs without alarms in all modes.
Outdoor • Acts as defined only after the last assigned partition is armed HOME or AWAY.
Arming key • Arming all assigned partitions.
Tamper, Line Fail, PSU Fail,
Panic
• Always armed.
Non alarm • Always ignored. There are no alarms for non-alarm zone types. Can be used for
example to activate PGMs without alarms in all modes.
Outdoor • Acts as defined only after the last assigned partition is armed HOME or AWAY.
Arming key • Arming all assigned partitions.
Tamper, Line Fail, PSU Fail,
Panic
• Always armed.
Note: A Soak Test of Common areas cannot be initiated when one of its partitions is armed. When Soak Test of a
Common area is active, an alarm event is ignored unless all the partitions that are assigned to the zone are armed.
D-306919 KP-250 PG2 Installer’s Guide 93
To Next Page
Loading...
