95x Series Operating Manual - May 17, 2022
Page 14 of 155
100V). Similarly, the user may specify that the Ground Bond current generated by a 952i, 954i or 959i is limited to
a user specified current between 1 and 40Arms. The remainder of this manual assumes that these optional limits
are at the maximum for the specific model.
SOFTWARE
QT Pro II – 950. A 45-day free trial included with each unit. This software provides-
• The user does not need to write software to use the 95x with a computer.
• Can control testing using very complex switching systems when used with Vitrek 964 Switch Matrix units.
• Easy to use fully graphical interface on a Windows based computer.
• Multi-level user login, enabling the configuration of tests to be locked except for certain users.
• Company wide use of test sequences using the company network.
• Test sequences can be downloaded into the 95x and run without the computer.
• Test results recorded on a computer or on the company network.
• Computer generated multi-level test reports.
• Compatibility with a wide range of Windows versions (Windows XP through Windows 8 as a Desktop
Application).
ACCESSORIES
• TL-115-95. 115V Receptacle Hipot Test Adaptor
• TL-115-GBR. 115V Receptacle Ground Bond Test Adaptor
• TL-115-95GBR. 115V Receptacle Hipot and Ground Bond Test Adaptor
• TL-IEC-95. IEC320 Power Socket Lead set for HiPot
• TL-IEC-GBR. IEC320 Power Socket Lead set for Ground Bond
• TL-IEC-95GBR. IEC320 Power Socket Lead set for HiPot and Ground Bond
• TL-209. Standard HV/CONT Alligator Clip Test Lead Set (one supplied with each unit).
• K-1R. 4-Wire Kelvin Low Resistance Measurement Lead Set
• K-2R. 4-Wire 40A GB Test Lead Set (one supplied with each 952i, 954i, 959i, and 957i with Opt GB40).
• RS-2. 6ft RS232 null-modem cable (95x to Computer).
• RSS-9. Remote Start Switch.
• RSF-9. Remote Start Footswitch.
• HVW-9. High Voltage Warning Light.
• RM-1. Rack Mount Kit for the 95x series.
• DIO-IS9. DIO Isolator for the 95x series. Available in models for 3V, 5V, 12V, or 24V logic.
To Next Page
Loading...
