95x Series Operating Manual - May 17, 2022
Page 27 of 155
SETTING, CHANGING OR CLEARING A MENU LOCK PASSWORD
• Ensure that the display indicates that the 95x is in the base menu state, i.e., the display shows the date
and time. If necessary, press the STOP button to abort a menu and return to the base menu state.
• Press the CNFG key. If a password has been already set and the menus are not already unlocked, the user
must enter the correct password to unlock the menu at this point.
• The display now shows the main configuration menu. An example of which is as follows –
TEST…
PRINTOUT…
SYSTEM…
INTERFACES…
DIGITAL I/O…
BUILD…
SET TO DEFAULTS…
LOCK PASSWORD:000000
RELOCK…
• Using the Left Arrow or Right Arrow keys as needed, change the selection point to the LOCK PASSWORD
line.
• Using the 0 through 9 keys and/or the A through F keys, enter a six-character password. If the password
000000 is set, then this clears the password and disables menu locking.
• Press the ENTER key.
• If a non-zero password was entered, the display now shows a message indicating that the front panel is
now locked and returns to the base menu state. Otherwise, a message is displayed indicating that the
menu lock is now disabled and the 95x stays in the main configuration menu.
RELOCKING MENUS
If the menu lock password has been set but the menus are presently unlocked (i.e., they have been previously
unlocked as described above) then the user may relock the menus as follows –
• Ensure that the display indicates that the 95x is in the base menu state, i.e., the display shows the date
and time. If necessary, press the STOP button to abort a menu and return to the base menu state.
• Press the CNFG key.
• The display now shows the main configuration menu. An example of which is as follows –
TEST…
PRINTOUT…
SYSTEM…
INTERFACES…
DIGITAL I/O…
BUILD…
SET TO DEFAULTS…
LOCK PASSWORD:000000
RELOCK…
• Using the Left Arrow or Right Arrow keys as needed, change the selection point to the RELOCK line.
• Press the ENTER key.
• The display now shows a message indicating that the front panel is now locked and returns to the base
menu state.
To Next Page
Loading...
