Vitrolife EmbryoScope - Connections to Supporting Systems

EmbryoScope time-lapse incubator
- 17 -
4 Connections to supporting systems
All connectors and sockets are found at the back of the EmbryoScope time-lapse incubator.
Connectors and sockets should only be used by a person certified by Vitrolife during installation.
Operators should never use or attach any tubing/wiring to the panel.
Product information label.
See section 15.1
Ethernet connection socket
CO
2
connection inlet
Service readout socket
Manufacturer
contact
information.
See section 17
External alarm
output socket.
See section 9.5
N
2
connection
inlet
Power supply socket
Fuse
replacement
information.
See section 11
Main power switch