EmbryoScope time-lapse incubator
- 66 -
3. Disengage the load door lock by
pressing the 2.5 mm Allen key into the
socket and pressing down the red load
door lock indicator.
4. Open the load door to the embryo
chamber.
5. Remove the cover plate.
6. If necessary, use a 2.5 mm or 3 mm
Allen key to pull the culture dish holder
towards the left until it is positioned in
the load area from which the
EmbryoSlide culture dishes can be
removed.
7. To resume using the EmbryoScope time-lapse incubator, reinsert the cover plate, close
the load door, turn on the time-lapse incubator and follow the instructions for recalibration
and adding EmbryoSlide culture dishes found in sections 5 and 6.3.
To Next Page
Loading...