EasyManua.ls Logo

Vitrolife EmbryoScope - Page 74

Vitrolife EmbryoScope
82 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
EmbryoScope time-lapse incubator
- 74 -
Bluetooth
WLAN 802.11 b
WLAN 802.11 g
WLAN 802.11 n
RFID 2450
LTE Band 7
2450 MHz, PM,
217 Hz, 2 W, 28 V/m
2450 MHz, PM,
217 Hz, 2 W, 28 V/m
WLAN 802.11 a
WLAN 802.11 n
5240/5500/5785
MHz, PM, 217 Hz,
0.2 W, 9 V/m
5240/5500/5785
MHz, PM, 217 Hz,
0.2 W, 9 V/m
NOTE 1 At 80 MHz and 800 MHz, the higher frequency range applies.
NOTE 2 These guidelines may not apply in all situations. Electromagnetic propagation is affected by absorption and
reflection from structures, objects and people.
1 Field strengths from fixed transmitters, such as base stations for radio (cellular/cordless) telephones and land
mobile radios, amateur radio, AM and FM radio broadcast and TV broadcast, cannot be predicted theoretically
with accuracy. To assess the electromagnetic environment due to fixed transmitters, an electromagnetic site
survey should be considered. If the measured field strength in the location in which the EmbryoScope time-lapse
incubator is used exceeds the applicable RF compliance level above, the EmbryoScope time-lapse incubator
should be observed to verify normal operation. If abnormal performance is observed, additional measures may be
necessary, such as reorienting or relocating the incubator.

Table of Contents