— 8 —
Transmits signals to projector.
Displays the VGA1/VGA2/PC source selection (toggle).
Displays the HDMI1/HDMI 2/DVI source selection (toggle).
Displays the USB source selection.
Navigates and changes settings in the OSD.
Quick Menu – For Vertical Keystone.
Navigates and changes settings in the OSD.
Quick Menu – For Horizontal Keystone.
Navigates and changes settings in the OSD.
Quick Menu – For Vertical Keystone.
Press to operate the on-screen pointer. DO NOT POINT IN EYES.
Play or pause video/music for MHL.
Reverse in set increments for MHL.
Play the previous item on the programming list for MHL.
Stop video/music playing for MHL.
Alternate input source.
Combo key function for Remote Control customer
code settings (ID + Number).
Auto adjustment for frequency, phase, and position.
Number for Remote ID setting used.
Displays the brightness setting bar.
Displays the lamp selections.
Freezes/unfreezes the on-screen picture.
Makes the screen blank.
Number for Remote ID setting used.
Use as on-screen pointer. DO NOT POINT IN EYES.
Displays the VIDEO/S-VIDEO source selection.
Displays the Network source selection.
Displays the HDBaseT source selection.
Enters and confirms settings in the OSD.
Navigates and changes settings in the OSD.
Quick Menu – For Horizontal Keystone.
Enable the Mobile High-Definition Link technology feature for smart
devices.
Forward in set increments for MHL.
Play the following item on the programming list for MHL.