— 62 —
INFORMATION Menu
Press the MENU button to open the OSD menu. Press the cursor ◄ / ► buttons to move to the
INFORMATION Menu.
Displays the activated input source.
Displays picture mode for projection.
Displays lamp mode for projection.
Displays the native resolution of input source.
Displays 3D image information for projection.
Lamp Hour
(Normal, ECO,
Total)
Displays the number of hours the lamp has been in use.
Displays the number of hours the air filter has been in use.
Displays the firmware version of the projector.
Displays the projector ID to for remote viewing.
Displays the serial number of the projector
Note:
INFORMATION displayed in this menu is for viewing only and cannot be edited.