Non clutch-dependent power take-off can be used
during driving and when the gearbox is not engaged.
Engage power take-off
1 Push in the locking button on the switch.
2 Press in the lower part of the switch.
The Indicator lamp lights up and the display shows
PTO.
Disengage power take-off
Push in the upper part of the switch.
Gearbox-mounted power take-off
The vehicle should remain stationary when the power
take-off is engaged.
The power take-off should not be engaged during
driving. If for some reason it must be engaged, then
gearshifting is not allowed.
Engage power take-off
1 Depress the clutch pedal.
2 Engage a low forward gear.
3 Put the gear lever in neutral.
4 Push in the locking button on the switch.
5 Press in the lower part of the switch.
The Indicator lamp lights up and the display
shows PTO.
6 Release the clutch pedal.
Disengage power take-off
1 Depress the clutch pedal.
2 Push in the upper part of the switch.
3 Release the clutch pedal.
J0008081
J0008082
178
Driving
To Next Page
Loading...
