Wacker Neuson ET12 02

BA ET18, 20, 24 en* 1.5 * et18_20_24en1_5SIX.fm S-3
Index
M
Machine overview .................................................. 3-1
Machine preservation ........................................... 7-51
Machine travel and stopping .................................. 5-3
Machine travel on public roads ............................ 4-38
Machine travel on slopes ....................................... 5-5
Machine travel position .......................................... 5-3
Machine weight .................................................... 9-12
Maintenance
Air filter ............................................................ 7-38
Maintenance (responsibilities and prerequisites) ... 7-1
Maintenance accesses ......................................... 7-14
Maintenance label .................................................. 7-8
Maintenance of attachments ................................ 7-50
Maintenance of the electrical system ................... 7-44
Maintenance plan ................................................... 7-2
Malfunctions ........................................................... 8-1
Air conditioning .................................................. 8-1
Attachments (Powertilt) ..................................... 8-2
Diesel engine .................................................... 8-1
Electrical system ............................................... 8-1
Hydraulic system ............................................... 8-1
Travelling drive .................................................. 8-1
Manual throttle ....................................................... 5-1
Mechanical brake ................................................... 5-2
Mechanical stop brake ......................................... 5-18
Mirrors .................................................................. 4-15
Model designations and trade names .................... 3-2
Models and trade names ........................................ 9-1
N
Noise emissions ..................................................... 9-8
O
Oil types
Hydraulic oil ..................................................... 7-12
Oil types (overview) .............................................. 7-11
Opening the door to a gap ..................................... 4-3
Opening the engine cover
.................................... 7-14
Opening the front window to a gap ........................ 4-8
Opening the lower front window ............................. 4-6
Opening the whole front window ............................ 4-7
Opening/closing the front window .......................... 4-4
Opening/closing the side window ........................... 4-9
Operating Pattern A/B .......................................... 5-20
Operation ............................................................... 5-1
Operation checklist ............................................... 4-37
Operation in water ................................................ 5-51
Operator seat ....................................................... 4-11
Options ................................................................. 5-56
Overview of control elements ............................... 5-11
P
Parking checklist .................................................. 4-37
Parking the machine on slopes .............................. 5-8
Payload/lift capacity .............................................. 9-14
Pedals and control levers ISO .............................. 5-13
Pedals and control levers SAE ............................. 5-15
Permanently putting out of operation ................... 5-65
Power outlet ......................................................... 4-27
Powertilt .................................................................. 9-6
Powertilt – AUX II ................................................. 5-36
Preheating ............................................................ 4-33
Preparations for starting the engine ..................... 4-39
Preparatory work for putting into operation .......... 4-35
Preparing lubrication ............................................ 7-23
Proportional controls ............................................ 5-55
Proportionally controlled additional control circuit –
AUX I .................................................................... 5-31
Protective FOPS screen ....................................... 4-20
Protective structures ............................................. 4-19
Putting back into operation ................................... 5-64
Putting into operation ............................................. 4-1
Putting into operation for the first time and running-in
period ................................................................... 4-38
Putting out of operation temporarily
..................... 5-63
R
Reducing the width of the stabilizer blade ............ 5-22
Reducing track tension ......................................... 7-49
Refueling .............................................................. 7-26
Relays .................................................................... 9-5
Releasing the door arrester .................................... 4-3
Releasing the pressure in the operating hydraulics ....
5-47
Removing/installing the cabin/canopy .................. 7-17
Replace the air filter ............................................. 7-37
Requirements for the operating personnel ........... 4-35
Retracting belt ...................................................... 4-13
Retracting seat belt .............................................. 4-14
Retrofitting a bucket ............................................. 5-48
Right/left/front/rear .................................................. 1-5
Rotating beacon ................................................... 5-10
Rotating the upper carriage .................................. 5-17