37
OPERATING MANUAL
VERSION 05/2017 ORDER NUMBER DOC 2357061
5.7 DUMP VALVE FOR WASTE SEPARATION OPTION
In addition to the simple dump valve, there is also a dump valve for waste separation. When
lling and when ushing, the system separates the ushing agent from the remaining
product. For this purpose, a double valve is used: one output for ushing agent, another
for waste (mixed product).
With an average number of paint changes and pot lives which are not too short, the dump
valve can be an alternative to a gun ush box for waste separation.
Not available for 2-circuit systems.
5.8 AIS DOSING SYSTEM OPTION
The hardener dosing valve's stroke is regulated automatically via the AIS (option). The AIS
(Adaptive Injection System) dosing system optimizes injection amounts and cycles and
adapts these continually to the changing ow rates. Thereby, the AIS ensures optimum
dosing and constant coating quality.
5.9 2CIRCUIT SYSTEM
The 2-circuit system consists of:
B_05641
− 2 uid circuits
− 1 control cabinet with:
− 4 mechanical push-buttons per uid circuit
− 1 operating panel for both uid circuits
The control cabinet controls both uid circuits. It is
possible to work with two uid circuits simultaneously.
Limitations for 2-circuit systems: see Chapter 5.5.1.1.
To Next Page
Loading...