WAGNER 2K COMFORT - Spraying with Gun Flush Box; Interrupting Work; Changing the Paint Recipe; A Valve Selection at Start

79
OPERATING MANUAL
VERSION 05/2017 ORDER NUMBER DOC 2357061
8.5.4 SPRAYING WITH GUN FLUSH BOX
Same procedure as in Chapter 8.5.3, however:
before actuating the START push button, insert the spray gun into the gun ush box.
Remove the spray gun after lling.
8.5.5 INTERRUPTING WORK
The STOP push button stops the coating process. All product valves are closed.
For electrostatic spray guns: switch o electrostatics.
8.5.6 CHANGING THE PAINT RECIPE
The recipe change ush is executed on all spray guns while the spray
nozzle is inserted.
Actuate the STOP push botton.
Select the new paint recipe on the screen (home page).
Without gun ush box With gun ush box
− Press START push button. − Insert spray gun(s) in gun ush box.
The spray gun is automatically opened
as necessary.
− Point the spray gun into the metal
bucket. Open the gun step by step.
Avoid splashback. − Press START push button.
The system is ushed (recipe change ushing " ").
Subsequently the new lacquer is lled.
As soon as the green START push button lights up and the home page appears on the
screen, the system is ready for spraying.
8.5.7 A VALVE SELECTION AT START
Possibly, a list of the A valves appears for selection at the start. Touch desired valve.
The option is set with the setting "Select A valve during start" (see Chapter 7.13.2).
8.5.8 CIRCULATION OPTION
If necessary, the A, B or C components not in use have to be circulated.