WAGNER 2K COMFORT - Control Cabinet; Main Switch

53
OPERATING MANUAL
VERSION 05/2017 ORDER NUMBER DOC 2357061
7.3 CONTROL CABINET
There are four push-buttons and an operating panel (touch screen) for the system
controller in the control cabinet. The touchscreen and the push-buttons can be used to
communicate with the controller.
Initialization program for commissioning: see Chapter 6.6.2
Basic operating principles: see Chapter 7
Workow: see Chapter 8
Detailed software documentation is separately available (see Chapter 1.3).
USB connection
The USB port is located at the control panel on the inside of the control cabinet.
Standard system of the control cabinet 2-circuit system of the control cabinet
B_05490
1
2
3
4
B_05641
1
2
3a
3b
4
Designation
1 Control cabinet
2 Operating panel (touchscreen)
3 Mechanical push-buttons
3a Mechanical push-buttons, Circuit 1
3b Mechanical push-buttons, Circuit 2
4 Main switch
2-circuit system
It is possible to work with two uid circuits
simultaneously. The operation of both uid
circuits is at any time immediately possible with
mechanical push-buttons (3a or 3b).
The operating panel can be switched at any time
quickly from one uid circuit to the other.
7.3.1 MAIN SWITCH
The main switch, on the right side of the control cabinet, switches the controller on and o.
When switched o, all valves close automatically.
Switching the system on and o: see Chapter 8.3.