WAGNER 2K COMFORT - Enter Paint Recipe

62
OPERATING MANUAL
VERSION 05/2017 ORDER NUMBER DOC 2357061
7.11 ENTER PAINT RECIPE
B_05476
Menu
Menu
AB : C
A : B
D
of ABC
Go to next pageSave paint recipe.
(with password level 1 or higher)
Select existing paint recipe.
New recipe: see Chapter 7.9.1
Enter mixing ratio (volume) for the selected
recipe
0.1:1–50.00:1
0.02% – 1,000.00%
If one or several components are not required:
enter 0.00:1 or 0.00%.
1K application: Enter 0.00:1 or 0.00% for all
components except for one.
The ow is measured by volume and the mixing
ratio is entered and controlled volumetrically by
default.
Select product valves for available
components.
If one or several components are not required:
B valve = "---------"
1K application: Enter "---------" for all components
except for one.
Page 2
− Enter pot life.
− Select ushing recipes to be used:
Is carried out, ...
End: ... after this paint recipe has been used when end ushing is being carried out.
R-R: ... after this paint recipe has been used when the recipe is changed.
Mix: * ... when ushing just from the external mixer to the gun.
Pre: * ... before using this paint recipe.
(For whether a recipe change and / or end ushing comes rst: see Chapter 7.13.2, "Pre-ushing
after paint change ush" or "Pre-ushing after end ushing").
* May also be missing, depending on conguration.
Select empty eld if no ushing recipe is to be active.
Page 3 (option)
− Product pressure when lling and working.
Prerequisite: low-pressure system with automatic product pressure regulator.