EasyManua.ls Logo

WAGNER 2K COMFORT - Settings; Password Level 2 Settings

WAGNER 2K COMFORT
128 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
66
OPERATING MANUAL
VERSION 05/2017 ORDER NUMBER DOC 2357061
7.13 SETTINGS
7.13.1 PASSWORD LEVEL 2 SETTINGS
Level 2
Menu
There are 24 pages of settings. Depending on conguration, pages may be jumped.
The page numbers with a gray background always appear, the others are optional. (Detailed
descriptions of these pages can be found in the 2K COMFORT Software Documentation.)
1 Number of paint recipes and number of ushing recipes.
QB, QC, QD Control
See the software documentation, "Diagnosis" chapter.
Gun Delay Delay time for alarms A106 to A113 (set "Minimum ow" and "Maximum
ow" Chapter 7.13.2, level 3, page 4)
2 Post-alarm for pot life Once the pot life + post-alarm times have passed, the
system stops (alarms A132–A144). The alarm is repeated until the system is ushed.
If "Automatic ushing at pot life alarm" is activated, and the guns are in the gun ush
box, ushing is started automatically.
Alarm delay Flow monitoring Delay time for alarms A121 and A122. (Activate
"Flow monitoring", Chapter 7.13.2, level 3, page 2. Enter the limits in the paint
recipe see Chapter 7.11)
Atomizing air at alarm stop
So that coating can be completed without dripping.
Atomizing air at end of ushing
To blow the air cap free.
VOC measuring unit
Percent or gram per Liter.
Password for password level 1.
3 Hose dimensions from product valves A and B to mixer.
4 For 3K system: hose dimensions from product valve C to mixer.
5 For 4K system: hose dimensions from product valves C/D to mixer.
6 Hose dimensions from mixer to splitter valve.
7+8 − Page 7: Hose dimensions from mixer to gun 1.
− Page 8: Hose dimensions from splitter valve to gun 1.
Gun content of gun 1
Gun 1: Filling via the dump valve
Quantity (as a percentage), which should be
discharged via the dump valve. (The remainder passes via the gun.)
Gun 1: Flush atomizing air % hose content
When ushing: What percentage of the
hose content from the mixer to the gun, can still be used for coating. The atomizing
air (and electrostatics) for gun remains activated for this period when ushing.
See also "Flushing pause" (level 2, page 16).
Gun 1: dump valve ushing time after lling. (Only with ushable dump valve.)
9 Hose dimensions from gun 1 to the dump valve. (Only with "Dump valve as return ow".)

Table of Contents