WAGNER PEM-X1 - 7 Operation; Qualification of the Operating Staff; Safety Instructions

27
PEM-X1
OPERATING MANUAL
VERSION 09/2012 ORDER NUMBER DOC 2326020
7 OPERATION
7.1 QUALIFICATION OF THE OPERATING STAFF
7.2 SAFETY INSTRUCTIONS
Incorrect operation!
Risk of injury and damage to the equipment.
The operating sta must be quali ed to operate the entire
system.
Before work commences, the operating sta must receive
appropriate training.
The operating sta must be familiar with the provisions of
European standards DIN EN 50050-2 and DIN EN 50177.
WARNING
Incorrect operation!
Risk of injury and damage to the equipment.
If contact with powder materials or cleaning agents causes skin
irritation, appropriate precautionary measures must be taken,
e.g. wearing protective clothing.
The footwear worn by operating sta must comply with
EN ISO 20344. The measured insulation resistance must not
exceed 100 MΩ (megaohms).
The protective clothing, including gloves, must comply with
EN ISO 1149-5. The measured insulation resistance must not
exceed 100 MΩ (megaohms).
WARNING